PC embossed sheet is a multi-functional sheet made of polycarbonate raw material. It features unique artistic textures and a comprehensive set of performance characteristics, suitable for a wide range of indoor and outdoor applications. Below is the detailed introduction:

1. Product Features
- Sturdy and tough: Manufactured from polycarbonate raw material to ensure the sheet is durable and flexible.
- Artistic textures: Available with diamond texture, lychee texture and other artistic textures. Its distinctive appearance enhances decorative effects and expands application scenarios.
- Lightweight and high strength
- It weighs only half of glass of the same thickness, making it easy to transport and install.
- Its impact resistance is 30 times that of tempered glass, delivering reliable safety performance and effective resistance to external impact.
- Versatile performance
- Weather-resistant and UV-resistant. It can be used outdoors for a long time without easy aging or discoloration.
- Rich color options, including transparent, brown, lake blue, royal blue, dark grey, light grey, grass green, milky white and more to meet diverse aesthetic requirements.
- Easy to process and install. It can be custom processed according to actual demands for convenient construction.

2. Product Specifications
- Dimension Parameters
- Width: 1220mm, 1560mm, 1820mm, 2100mm or custom sizes.
- Length: Customizable.
- Thickness: 1.5mm, 2mm, 3mm, 4mm, 5mm, 6mm (available in any thickness between 1.5mm and 6mm).
- Roll sizes: 1.22*30m/roll, 1.56*30m/roll, 1.82*30m/roll, 2.1*30m/roll.
- Sheet sizes: 1.222.44m/sheet, 23m/sheet.
- Physical and Mechanical Properties (in accordance with JG347T-2012 Polycarbonate (PC) Solid Sheet Standard)
- Tensile properties: Tensile yield stress ≥55MPa, nominal strain at break ≥60%, tensile modulus of elasticity ≥2200MPa.
- Impact strength: Charpy notched impact strength ≥6KJ/㎡, tensile impact strength ≥150KJ/㎡, maximum penetration force for falling dart impact (perforation property) ≥600N, maximum penetration energy ≥5J.
- Temperature performance: Vicat softening temperature ≥145℃, heat deflection temperature ≥130℃.
- Dimensional stability: Heating dimensional change rate ≤10% (when 1.5≤d≤5), ≤5% (when d≥5); coefficient of thermal expansion ≤7.5×10⁻⁵ /℃.
- Optical performance (transparent sheet): Haze ≤5.0%, ultraviolet transmittance ≤0.001%.
- Weather resistance (2000h): Color difference ≤5.0, yellow index change ≤3.0, retention rate of falling dart impact (perforation property) ≥60%.
- Combustion performance: Class B or higher.

3. Application Scope
It is widely used for indoor partitions, bathroom doors and windows, fences, carports / awnings, lamps, DIY projects and other fields, adding aesthetics and functionality to different spaces.

4. Installation and Precautions
- Storage requirements: Store in cool and dry places. Avoid direct sunlight (otherwise the protective film will be hard to peel off) and rain exposure. Do not stack directly on cement floors.
- Sealant selection: Neutral silicone sealant must be used. Acidic or alkaline glass adhesive is prohibited.
- Screw fastening
- Rivets shall not be used for installation. For curved embossed sheet projects, drilling screws on the panel is forbidden. It is also not recommended for gentle slope structures. If screws have to be used, special waterproof gaskets must be fitted. Pre-drilling (enlarged hole) is required for each screw position: the hole diameter shall be 4mm larger than the screw diameter. The screw hole shall be at least 30mm away from the sheet edge to prevent cracking caused by thermal expansion and contraction.
- Service environment: The embossed sheet is sensitive to acid and alkali. It cannot be in direct contact with cement brick walls, and shall not be used in environments with acidic or alkaline substances and gas.
- Protective film treatment: The protective film prevents scratches during transportation and installation. It shall be peeled off immediately after construction completion.
- Cutting method: High-speed fine-tooth circular saw or portable electric saw can be used for cutting. Feed slowly, support the sheet near the cutting position and remove dust and debris during cutting.
- Cleaning method
- Rainwater self-cleaning is usually sufficient. For local small areas, diluted household cleaning agents (without corrosive agents or organic solvents) can be used. Dry wiping should be avoided. A water gun can be adopted for large-area cleaning.








